Home Registration Login
I welcome you Guest | | RSS
Home » WiN » BLEASS SampleWiz 2 Unofficial Fix No Sound Patch Problem Cubase 12
BLEASS SampleWiz 2 Unofficial Fix No Sound Patch Problem Cubase 12



WIN | 2 MB


With this new collaboration, BLEASS has distilled the phenomenal breadth and depth of Jordan’s musical knowledge and experience into an intuitive and inspirational synthesizer that has the flexibility to expand the creativity of each and every musician.

BLEASS SampleWiz 2 unleashes your sonic creativity and the power of your iPad or iPhone. With just a few swipes of your finger you can easily capture any sound and transform it into a playable, expressive, gorgeous-sounding synth voice.

BLEASS SampleWiz 2 fits in with your way of creating and performing too, with both standalone app and AUv3 plugin included. And as well as operating as an instrument, the plugin can be used as an effect, making it wonderfully easy to sample and resample from any other instrument or track within your host app.

BLEASS SampleWiz 2 includes a number of performance interfaces, and takes full advantage of MPE to enhance expressiveness and playability. Play using any of the different keyboard views – half-screen, full-screen or double-layer, or using BLEASS’ innovative full screen Wave Keyboard view.

GENERAL
Set the basic synth properties, such as voices, glide, MPE modulation targets, and arpeggiator.

- Adjust master volume and read current output level, including peaks.
- Switch between monophonic and polyphonic modes.
- Set note glide time, and enable or disable retriggering of ADSR envelopes when playing legato
- Configure and map mod wheel and MPE controllers (Slide and Pressure) to up-to two destinations each.
- Enable or disable arpeggiator, and configure its style and synchronisation settings.

SAMPLE
Capture and edit samples and loop points, and configure the granular engine.

- In standalone mode, capture samples directly from your iPad’s or iPhone’s mic, or from an external soundcard if you have one connected.
- When used as an AUv3 plugin effect, record from any track the plugin is assigned to, whether the track is an external source or an AUv3 instrument such as BLEASS Alpha Synthesizer.
- Resample the current sound and performance – infinite sound modifications beckon!
- Visualise your samples and edit their start, end and loop points using the interactive waveform view.
- Trigger and play samples in a new way by tapping and dragging on the waveform view. Enable the Y PITCH button to control the pitch freely with the vertical position of your finger; also enable the SNAP button to have the pitch control lock to precise semitones.
- Reverse your samples, crop them, or modify their gain and pitch.
- Enable Granular or Cloud mode and configure the grain size, speed, turbulence, spread and position of the granular sample point.

FILTER/ADSR
Configure SampleWiz 2’s overdrive processor and multi-mode filter, and set up ADSR envelopes for amp and filter cutoff.

- Enable or disable the drive processor, and configure its strength and sound.
- Enable or disable the multi-mode filter. Choose from low-pass, high-pass, band-pass and notch modes.
- Set filter cutoff and resonance by touching and dragging in the filter cutoff visualisation.
- Set how strongly the filter cutoff envelope and keyboard tracking affect the filter cutoff frequency.
- Configure the amp and filter ADSR envelopes. Drag vertically in each segment of the envelope display to adjust the attack, decay, sustain and release. The resulting envelope shape is shown too.

MODULATION
BLEASS SampleWiz 2 has a pair of freely assignable LFOs (Low Frequency Oscillators) and a third ADSR envelope. Each source can be assigned to up-to two destinations.

- Select LFO waveforms – sine, triangle, saw up, saw down, square and sample-and-hold.
- Control LFO rate and offset, and how strongly it will impact its assigned destinations.
- Intuitive LFO visualisation gives easy understanding of what each is doing.
- Set up the additional assignable ADSR envelope, and configure mapping to up-to two destinations.

MOTION
BLEASS’ unique Motion Sequencer generates rhythmic movement and repeating patterns of modulation values that can be assigned to any two modulation destinations.

- Enable or disable the Motion Sequencer, and create a sequence of modulation values.
- Configure the length and randomness of a sequence.
- Choose whether the Motion Sequencer syncs to your DAW, or steps through its pattern each time you trigger a note.
- Arp Reset determines whether the Motion Sequencer restarts or continues when the arpeggiator is enabled and a new chord is played.
- The Dispatch mode controls how the Motion Sequencer’s modulation will affect the voices of the synth. In Global mode, all voices are affected; in Notes mode, only the last-played note is affected.
- Snap Mode: Set whether the sliders used to define the sequence move freely or snap to fixed values.

FXs
Sweeten your sound and add some final polish with delay and reverb processors.

- Enable or disable delay processor.
- Configure delay type, speed, synchronisation, tone and mix.
- Toggle ping pong mode and control stereo width of the delay effect.
- Enable or disable reverb processor.
- Sculpt the sound and character of the reverb (Low Cut / Modulation rate / Modulation Amount / Roomsize / Length…)
- Set the shimmer pitch, delay time and amount to add a gorgeous, shimmering echoes within the reverb sound.
 
The official v1.0.6 has an issue that it is silent on various patches
within Cubase 12. Nuendo 12 is ok. This VST3 fixes that issue
while maintaining compatibility in the same precise way as before,
besides the actual fix for Cubase. Enjoy and rock on.

This should hold you off until they officialy fix it themselves.


 

Home page

CLiCK HERE FOR DOWNLOAD

 


[ Report broken link!!! ]

Русские пользователи - используйте ВПН для скачивания! Наши ссылки не работают для России и возможно каких-то других стран!
Russian users - use VPN to download! Our links do not work for Russia and possibly some other countries!



Category: WiN | Views: 200 | Added by: DOLBATOR | Tags: 12, fix, Problem, Cubase, Sound, Unofficial, BLEASS, Samplewiz, patch, No | Rating: 0.0/0
Tags:
Total comments: 0
Only registered users can add comments.
[ Registration | Login ]


Google search for site:


Popular News:


Chat:


Came here today:

DOLBATOR

Total online: 9
Guests: 8
Users: 1
DOLBATOR

Flag Counter