|Soundiron Waterharp v2.0 KONTAKT
KONTAKT | 4.74 GB
Links update: 22/07/2020
The Soundiron Waterharp is a deeply multi-sampled percussion and effects instrument library that captures the heart and soul of the waterphone. This unique instrument concept was originally developed by Richard Waters in the late 1960s. Waterphones — also commonly known as Water Harps — are found in all shapes and sizes, but they generally follow the same basic design: a brass vessel with a hollow brass water chamber and a long neck. The top side of the chamber is adorned with vertical brass tines or bars. It is played by strumming, striking and bowing these tines, which resonate together creating darkly harmonic or dissonant tones and textures.
The tines are cut to specific lengths and arranged to create scales as they wind around the body of the waterphone. Adding water to the chamber and changing the position of the waterphone drastically changes the pitch and harmonics that are produced when the instrument is played. The water chamber itself can also be played as a percussion instrument. Overall, the waterphone can be considered as both a tuned and un-tuned percussion instrument, but is most often used in suspense and horror soundtracks and sound design as a dramatic sound effect tool.
We played it with lots of different mallets, sticks, metal rods, fingers and palms, bows and even voices to explore every nuance and hidden musical potential of this instrument. We recorded it both empty and full of water. We even recorded it from the inside out using hydrophones (underwater microphones), while being cooked over open flame and while filled with machine screws. And finally, we created a wide selection of ambient soundscapes, pads, drones, ambiences and atmospheres using the recordings and all manner of creative sound design techniques to take this library to the next level.
- Bowing (no water) Slow, Medium, Fast FX
- Bowing sweep (water) Slow, Medium, Fast FX
- Bowing 2-note legato
- Bowing Sustain (with and without water)
- Bowing Staccato
- Bowing FX grinding w/ tine buzz (with and without water)
- Bowing FX w/ magnets
- Bowing FX w/ hydrophone (underwater mic)
- Bowing FX w/vocals
- Bowing FX boiling at four different temperature levels
- Mallet Rubber (6-7 velocity layers – 6 round robin) at +16 tines
- Mallet Metal (6-7 velocity layers – 6 round robin) at +8 tines
- Hand Played “Metal Tabla” (10 velocity layers – 10 round robin) bottom and top
- Wooden Mallet (6-7 velocity layers – 6 round robin) at +20 tines
- Hydro Mallets (6 round robin) at +20 tines
- Rubber, Metal and Wooden Mallet Sweeps (Slow, Medium, Fast)
- Hydro-Vocal drones, phrases and more…
- Custom ambiences, including patches by Steven Tavaglione (Ambient music on Wall-E, American Beauty and more)
Waterharp 2.0 includes automatable Attack, Release, Edge, Filter, Vibrato and Convolution reverb with 30+ custom halls, rooms and special FX impulses. We’ve optimized presets to put each category right at your fingertips, with easy articulation menu loading. We’ve also rolled our Arpeggiator system into every tuned and strike percussion preset, with plenty of mode, sequencing and time signature options. The effects presets now feature dynamic waveform display, with real-time playback and offset cursor. We've also added a new range of deep ambiences, synths and sound-designed atmospheres, all hand-crafted from the original instrument source.
Requires FULL Kontakt 5.1 or higher!
CLiCK HERE FOR DOWNLOAD
[ Report broken link!!! ]
Please Donate To Bitcoin Address: [[address]]
Donation of [[value]] BTC Received. Thank You.