|Helix Big Pack + Add on
Line6 Helix | Preset | 3.20 MB
Links update: 15/07/2020
My main presets pack for the Line6 Helix (2.01 firmware and above). Originally it had 175 presets covering many genres (pop, rock, fusion, metal…), and with the bonus folder, which has updated and new presets for Pink Floyd songs, there’s now a total of 187 presets. This package also has 25 user IRs.
The general volume of my presets is intended to be on par with the stock presets, or a little quieter. I wanted to avoid the risks of digital clipping, which I hear on many presets I downloaded from Custom Tone.
My presets are first and foremost a very big collection of amp/cab tones, effects are a bonus. There’s also a few, like the ambiant ones, U2 or Pink Floyd presets etc in which the effects settings are equally important. Like my presets for Axe-Fx and AmpliFire, they are intended to cover various genres, from classic rock to metal through pop and fusion. Some of them uses snapshots, again, check the .xls file for details.
I like my cleans without any hair, and quite compressed. Compressor is an important element in my “Cln xxx” presets. It can of course be removed ; on many presets, the sound will then be a little dirtier, on the edge of breakup.
Also included is a collection of metal presets meant to be used for recording, so they’re brighter than what I normally use. I used a DI track from one metal song I recorded to tweak them. However they probably have a little more bass than needed but I like that for playing with them. In a mix, I’ll cut the lows some more.
You need to put the user IRs in the right places – “081 LX TDR Ultraclean.wav” goes to user spot 081, etc.
Watch this video for the easiest procedure
My presets have been tweaked with these IRs, they won’t sound like intended if you don’t load them. All are custom creations made with various free sources, or no source at all, and various techniques like tone matching.
Of course, you can try to swap them with your favorite third party cabs, this will probably work if you choose similar cabs (like, a V30 4×12 IR instead of my HG (high gain) cabs, G12M and the like instead of my Marshall cabs etc… Experiment !)
To make things simpler for most Helix users, I didn’t put my user IRs at the beginning of the cab bank, but from 074 to 098.
Note : the acoustic sim IRs are way quieter than the others, it’s their nature, and I boosted the level from the IR block accordingly. Be careful if you try other IRs with the Acoustic Sim presets, lower the IR block volume first !
Similarly, the volume of the IR block in the “Cln” presets is at -12 instead of -18 because for some amps, with the very low gain settings, the channel volume at 10 wasn’t enough to compensate.
[ Report broken link!!! ]
Please Donate To Bitcoin Address: [[address]]
Donation of [[value]] BTC Received. Thank You.