Klevgrand GotoEQ v1.0.4 WiN

WiN x64: VST3, VST2, AAX | 4.3 MB
A classic EQ unit reinvented for the digital age
GotoEQ is a new evolution of a vintage passive tube-based program equalizer, expanding on that classic sound with dynamic EQ bands. GotoEQ performs the classic ‘low-end trick’ with dual Boost and Attenuate controls for its low shelf, but it also offers the ability to perform a 'high-end trick', with a similar formulation of high shelving. With continuous frequency selection, you can tune each band as you like. But most importantly of all, GotoEQ’s two mid bands offer dynamic attenuation, bringing a musical approach to the classic EQ unit.
...
Read more »
|
Klevgrand Degrader v1.0.4 WiN

WiN x64: VST3, VST2, AAX | 15.4 MB
Destroy any mix in bits and pieces
Degrader is a combined resampler and bitcrusher plugin. It can be used to simulate the sound of vintage digital gear, as a lofi-effect or distortion unit. Since all parameters are fully automatable it’s a handy plugin for creating unique and interesting drops, sweeps and other transitions.
...
Read more »
|
Klevgrand Spinn v1.1.1 WiN

WiN x64: VST3, VST2, AAX | 24.3 MB
Four-band rotating modulation effect
Spinn is a four-band rotating modulation effect. It has similarities to, but doesn't aim to replicate, a Leslie speaker (call it a spin-off if you like). Four rotors (one per frequency band) with individual speed controls, acceleration and deceleration times, adjustable size and modulation. Each band also has a velocity control, which will adjust the speed according to the band's input level. Spinn also features custom amp modeling (clean or hot) and room simulation.
...
Read more »
|
Klevgrand REAMP v1.2.1 WiN

WiN x64: VST3, VST2, AAX | 17.4 MB
Analog gear simulation with a unique & efficient spectral saturation algorithm
REAMP is a complex spectral saturation processor, simulating a set of different analog gear in a new and unique way. Benefits of this algorithm is that it is highly CPU efficient and adds (almost) no latency. The seven models available are based on real analog gear, individually measured in two dimensions; gain responses (-inf dB to +6 dB) at the frequency spectrum 20Hz to 20kHz. This data is used to transform input audio to output audio. A four-band spectral drive allows you to let the unit work even more.
...
Read more »
|
Klevgrand LUXE v1.1.2 WiN

WiN x64: VST3, VST2, AAX | 7.5 MB
Suit up your mix with this elegant compressor / saturator / enhancer / enchanter
LUXE is an effect plugin that compresses and saturates an audio signal in a quite subtle but musical way. It is very useful for making a track "fit in the mix", and can be used with very good results on a drum bus, a vocal track or anything in between.
...
Read more »
|
Klevgrand Hillman v1.0.3 WiN

WiN x64: VST3, VST2, AAX | 4.6 MB
Inspired by the past, designed for the future
Hillman is a synthlike instrument inspired by old combo-organs, string machines and similar vintage gear. It has 4 voices per note, each with selectable waveform (transistor:ish, tube:ish, sine and special plasma), octave switch and a level control. The sound is generated with an analog approach, but does not use samples or sampled wavetables. Hillman also has an intuitive ADSR envelope control, FX section with Chorus, Phaser & Reverb, and comes with many built-in presets.
...
Read more »
|
Klevgrand Brusfri v1.2.2 WiN

WiN x64: VST3, VST2, AAX | 7.0 MB
An advanced audio noise reducer with a simple and straight-forward interface.
Brusfri is a highly advanced audio noise reducer, packed into a simple and straight-forward interface. It is very well suited for cleaning up noisy audio recordings, while retaining sound quality. Unlike many other noise reducers on the market, Brusfri doesn’t mess with audio phasing to suppress noise (a technique that often comes with audible side effects). Instead, multiple fine-tuned gates are used to silence unwanted noise.
...
Read more »
|
Klevgrand Kleverb v1.1.2 WiN

WiN x64: VST3, VST2, AAX | 31.1 MB
A smart reverb, designed to fit in any mix.
Kleverb is a high quality algorithmic reverb effect. An intuitive UI combined with a carefully calibrated network of filters and delays makes this a powerful effect useful in any context; all from acoustic jazz to EDM.
...
Read more »
|
Klevgrand Pipa v1.0.2 WiN

WiN x64: VST3, VST2, AAX | 40.2 MB
Pipa is a singing vocal synth with a unique and different sound. It is inspired by the expression and flexibility of the human voice, but does not aim to cover all the aspects of an actual voice. Instead, it focuses on an organic and musical sound where the user has the possibility to control formants and dynamics seamlessly.
...
Read more »
|
Klevgrand Rum v1.0.2 WiN

WiN x64: VST3, VST2, AAX | 26.4 MB
Rum simulates different kinds of rooms – from acoustically treated studio booths to spaces found in an ordinary home. Think of this plug-in as if the audio source was recorded in stereo from the other side of the room, a common technique for recording acoustic instruments in order to breathe life into a dry sound source.
...
Read more »
|
Klevgrand Skaka v1.1.3 WiN

WiN x64: VST3, VST2, AAX | 97.2 MB
Skaka is a sample-based sequencer plugin for shaker percussion instruments. It has 12 slots, each with its own instrument, parameters (lots of them!) and pattern. We've built both the sequencer and the sampler from the ground, to optimize this instrument for these types of sounds. Each pattern contains events, with individual parameters like pitch, velocity (as in how fast the instrument is shaken), and envelope.
...
Read more »
|
Klevgrand Ting v1.1.1 WiN

WiN x64: VST3, VST2, AAX | 100.6 MB
Slammer is a multi-sampled drum plug-in that contains 30 different instruments made from a large number of carefully recorded and edited samples. Integrated custom-built real-time effects combined with some clever routing makes Slammer a versatile and flexible virtual instrument that is capable of rendering anything from natural acoustic to heavily distorted and compressed drum sounds. Each sound can be customized with a wide array of settings like pitch, filtering, effect sends, decay time, velocity mapping and much more.
...
Read more »
|
Klevgrand Modley v1.1.4 WiN

WiN x64: VST3, VST2, AAX | 28.5 MB
Modley is a modulation delay with effect insert capabilities, which lets you design the whole delay signal with several carefully selected effect modules to create unique signal flows. The idea behind Modley is to push the boundaries of what a delay effect is capable of – only your imagination sets the limits! While Modley sure can be used to do all the traditional tricks - Stereo delay, Tape delay, Short slapback delay etc., its true potential lies within the variety of unexpected effect modules that can be applied.
...
Read more »
|
Klevgrand Borsta v1.0.1 WiN

WiN x64: VST3, VST2, AAX | 175 MB
Borsta (Swedish verb, means to brush) is a drum and percussion instrument that simulates strokes and brushes. Its unique audio engine allows for an endless number of very natural sounding brushing phrases and rhythms.
...
Read more »
|
Klevgrand Fosfat v1.1.0 WiN

WiN x64: VST3, VST2, AAX | 7.0 MB
No drum deserves to be dull or lame. Fosfat will add bite and oomph to your drums or percussion (or any percussive sounds). It follows the dynamics of the incoming sound and adds tonal and noise textures to it. We think of it almost like an EQ, in the way it shapes the sound, but it adds instead of cutting or boosting. It’s perfect for when you have a nutrient deficient recording (lacking bass or attack in a kick drum for example), or if you just want to add some extra sub or pleasant stereo fizz to any percussive sound.
...
Read more »
|
« 1 2 ... 56 57 58 59 60 ... 400 401 » |